Tilers in Furner
SA Tiling Pro is an Adelaide-based tiling contractor that works across all of South Australia, and Furner is 3 to 5 hours south-east of Adelaide. Wherever the job is, you get the same licensed and insured team, the same standards and the same free quote. Homes, rentals and commercial premises on the Limestone Coast are all catered for.
Tiling in Furner at a glance
- Postcode
- SA 5280
- Licensed
- Fully insured
- Quotes
- Free, itemised
- Experience
- 20+ years
- Postcode
- SA 5280
- Licensed
- Fully insured
- Quotes
- Free, itemised
- Experience
- 20+ years
Tiling services in Furner
Everything from a splashback to a full commercial fit-out, delivered to Furner and the wider Limestone Coast & South East area.
Complete bathroom renovations for Furner homes
Whether it is a main bathroom, an ensuite or a small second bathroom, SA Tiling Pro delivers complete renovations in Furner: demolition and disposal, substrate repair, waterproofing, tiling, shower screens and accessories, with fixtures fitted off by a licensed plumber.
Because we are tilers first, the finish is where the difference shows: flat floors with minimal lippage and proper falls to the waste, aligned niches, tight grout lines and slip-rated tiles chosen for a wet area.
Tiling homes and businesses in Furner
Every home in Furner is different, which is why we quote on site rather than over the phone. Seeing the substrate, the drainage and the existing finishes lets us give you an accurate price and a realistic timeframe.
Mount Gambier has a strong stock of homes built from local limestone alongside post-war brick and weatherboard houses and newer subdivisions on the city's edges. Across the region there are heritage cottages in towns such as Penola, holiday homes and shacks in Robe, Beachport and Kingston SE, and farmhouses on grazing and cropping land.
Choosing tiles and grout for Furner homes
We help you weigh up porcelain, ceramic, stone and mosaics for each space, and we advise on grout colour, joint width and sealing so the finish is easy to keep clean and suits the way the room is used.
Commercial and multi-unit work in Furner
Shops, clinics, offices, accommodation and unit blocks need floor tiles with the right slip rating, classified under AS 4586, and a finish that stands up to heavy traffic. SA Tiling Pro prices multi-unit and commercial jobs as a whole, works to the site program and keeps the paperwork in order for the builder or property manager.
About Furner
Furner (postcode 5280) is part of the Limestone Coast & South East region, 3 to 5 hours south-east of Adelaide. SA Tiling Pro is Adelaide based and services Furner along with nearby Beachport, Canunda, Clay Wells.
Things we consider on the Limestone Coast
- Cold, wet winters and frost
This is one of the highest-rainfall parts of South Australia, and Mount Gambier and Naracoorte get regular winter frosts. Outdoor tiling needs low-absorption porcelain, adequate falls and external membranes to AS 4654 so water does not sit under the tiles.
- Limestone and heritage substrates
Older Mount Gambier stone homes and Penola cottages often have uneven floors, lime mortar and old render. We assess the substrate first, level and prime where needed, and place movement joints in line with AS 3958.1.
What a tiling job in Furner looks like
The work itself follows a fixed order: preparation, waterproofing where it applies, tiling, grouting, sealing and clean-up. We check each stage before moving to the next, because a level floor and a dry membrane are far easier to get right than to fix.
- 01
Get in touch
Call or send the quote form with a few details about the space and the tiles you have in mind.
- 02
On-site quote
We measure up, check the substrate and waterproofing, and give you a clear written quote.
- 03
Preparation and tiling
Surfaces are prepared, wet areas waterproofed, then tiles are laid to a planned layout.
- 04
Grout, seal, hand over
Grouting, silicone and a full clean-up, then a walk-through to make sure you are happy.
Why Furner chooses SA Tiling Pro
- 20+ years on the tools
Two decades of bathrooms, kitchens, floors and commercial fit-outs across South Australia.
- Fully licensed and insured
Licensed tiling contractor with public liability insurance, so your project is protected.
- Waterproofing done properly
Wet areas prepared and sealed to Australian Standard AS 3740 before tiles go down.
- Straight lines, level floors
Careful layout, lippage control and clean grout lines on every job, large or small.
- Transparent, free quotes
Itemised written quotes with no hidden extras and no obligation.
- All of SA, city and country
Adelaide based and happy to travel for regional work from the Riverland to the Eyre Peninsula.
Free quote for Furner
Tell us about the job and we will be in touch within one business day.
Tiling questions from Furner
We are ready when you are. Book a free quote for your Furner property and let SA Tiling Pro take care of the rest.
Are you licensed and insured?
Can you help me choose grout colour and tile layout?
How should I prepare before you arrive?
Do you travel to Mount Gambier and the rest of the Limestone Coast?
Is waterproofing included in bathroom tiling?
Tilers near Furner
We also service these suburbs and towns around Furner.
Need a tiler in Furner?
Free, itemised quotes for homes and businesses in Furner and across Limestone Coast & South East. Call 0400 028 777 or send the form.