Skip to content
    SA Tiling Pro logo
    Tiling service

    Kitchen Tiling & Splashbacks across South Australia

    Kitchen tiling and splashbacks for homeowners, renovators and builders across Adelaide and South Australia. We tile splashbacks, kitchen floors and island panels in new builds and renovations, from a single splashback to a full kitchen fit-out. Licensed, insured and backed by more than 20 years on the tools. Free, no-obligation quotes.

    Get a Free Quote 0400 028 777
    20+
    Years of tiling experience
    Licensed
    Fully licensed & insured
    1,890+
    SA suburbs & localities serviced
    Free
    No-obligation quotes
    Overview

    Kitchen Tiling & Splashbacks done properly

    Kitchen tiling covers the splashback behind the cooktop and sink, the floor, and sometimes the face of an island bench or a full wall. Splashbacks are usually one of the last trades in, after the benchtop is fitted, so the work has to fit around cabinetry, power points, rangehoods and window reveals. We measure the space, set out the tiles so cuts land where they are least visible, and finish with grout and a flexible sealant at every junction with the benchtop and joinery.

    Good kitchen tiling shows in the details. Grout lines run straight and even from one end of the splashback to the other. Cut-outs around power points sit tight to the plate so nothing is visible once the cover goes on. Tiles are flat with no lippage, which matters most on a splashback lit from a window or under-cabinet strip lighting, because raking light shows every high edge. Mitred or trimmed external corners, a consistent gap to the benchtop, and a clean silicone joint finish the job.

    Preparation decides how long the tiling lasts. Splashbacks go onto plasterboard, fibre cement or old tile, and each needs the right primer and adhesive. Kitchen floors need a sound, level substrate. Older Adelaide homes often have uneven concrete that needs a levelling compound, or timber floors that need fibre-cement underlay or a decoupling membrane before tiling. A kitchen is not a wet area, but the area around the sink gets wet, so we seal junctions and use water-resistant adhesives. Layout is planned before adhesive is mixed, so joints line up with the benchtop, rangehood and floor.

    What's included

    • Kitchen splashback tiling

      Tiled splashbacks behind cooktops, sinks and along benchtops, in subway, mosaic, large format or feature tile. Cut neatly around power points, windows and rangehoods.

    • Kitchen floor tiling

      Porcelain and ceramic floors laid level and flat, with the layout planned so cuts at kickboards and doorways are tidy.

    • Island and bench panel tiling

      Tile to the face of an island bench or breakfast bar, with finished edges and mitred corners.

    • Full-height feature walls

      Tiling from benchtop to ceiling, or across a whole wall, for kitchens without overhead cupboards.

    • Substrate preparation and levelling

      Priming plasterboard and fibre cement, patching, self-levelling compound on uneven concrete, and fibre-cement underlay or a decoupling membrane over timber floors before any tile goes down.

    • Old tile removal

      Removal of existing splashback or floor tiles, disposal of the waste, and repair to the wall or floor behind.

    • Grouting and silicone sealing

      Grout matched to the tile, plus flexible silicone at the benchtop, internal corners and joinery junctions where movement occurs.

    • Edge trims and finishing

      Aluminium or stainless steel trims, bullnose or mitred edges to exposed tile edges around windows and end panels.

    Our process

    How we approach kitchen tiling

    1. 01

      Quote and measure

      Send photos and rough sizes, or book a site visit. We measure, talk through tile options and layout, and send a written, no-obligation quote.

    2. 02

      Tile selection and setout

      You choose the tile, or we suggest options that suit the kitchen. We confirm quantities, grout colour, trims and where the joints will run.

    3. 03

      Preparation

      Old tiles come off if needed, the substrate is cleaned, primed and levelled, and the benchtop and cabinetry are protected.

    4. 04

      Tiling and grouting

      Tiles are laid to the agreed setout and the adhesive is left to cure, then the joints are grouted and every junction is sealed with silicone.

    5. 05

      Clean-up and handover

      We clean the tiles, remove waste and walk you through care of the grout and sealant. Your electrician can refit the power points once the grout has cured.

    Materials

    Tile options we work with

    Not sure what to choose? We will talk you through what suits the space, the budget and the way it will be used.

    Ceramic and subway tiles

    The standard splashback choice. Glazed ceramic is easy to wipe down, comes in many colours and sizes, and suits stacked, brick-bond or herringbone patterns.

    Porcelain

    Dense, low-absorption and hard-wearing, so it suits kitchen floors and high-use splashbacks. Large-format porcelain slabs can give a near-seamless splashback with very few joints.

    Natural stone

    Marble, travertine and limestone look good but are porous, stain from oil and wine, and etch when acidic foods such as lemon or vinegar sit on them. They need sealing on installation and periodic resealing.

    Mosaics

    Glass, ceramic or stone mosaics on mesh sheets suit feature strips and full splashbacks. More grout lines mean more cleaning, and glass needs a white adhesive to avoid shadowing through the tile.

    Large format floor tiles

    Tiles of 600 x 600 mm and larger mean fewer joints and a cleaner floor, but they need a flat substrate and a levelling system to avoid lippage.

    Terrazzo-look porcelain

    Porcelain that mimics terrazzo gives the look without the sealing and polishing real terrazzo needs. It works on floors and splashbacks and hides crumbs and marks well.

    FAQ

    Kitchen Tiling & Splashbacks questions

    Straight answers to the questions we hear most about this service.

    How long does a kitchen splashback take to tile?
    A standard splashback is usually one to two days on site: one day to tile, and a return visit to grout and seal once the adhesive has cured. A full kitchen floor adds time depending on size and how much preparation is needed. We give you a timeframe with the quote.
    What affects the cost of kitchen tiling?
    The main drivers are the area to be tiled, the tile itself, the amount of cutting around power points and windows, and any preparation such as removing old tiles or levelling a floor. Small mosaics and herringbone patterns take longer to lay than large-format tiles. We quote each job on its own after seeing the kitchen.
    Does a kitchen splashback need waterproofing?
    Kitchens are not classed as wet areas under AS 3740, so a full waterproofing membrane is not required behind a splashback. The junction between the benchtop and the tiles is sealed with flexible silicone, and we use adhesives suited to occasional wetting around the sink. A laundry next to the kitchen is a different matter and does need waterproofing.
    Which tiles are best for a kitchen splashback?
    Glazed ceramic and porcelain are the easiest to clean and hold up to heat and splashes behind the cooktop. Natural stone works but needs sealing and care with acidic foods. Choose a tile you can wipe down, and think about how many grout lines you want to keep clean.
    What grout is best for a kitchen, and how do I look after it?
    Behind a cooktop, a sealed cement-based grout or an epoxy grout both stand up to grease and heat, and epoxy resists staining without needing a sealer. For day-to-day care, wipe splashes off while they are fresh and use a pH-neutral cleaner rather than bleach, which can discolour coloured grout, or acidic cleaners, which etch cement grout and natural stone. Reseal cement grout every year or two, and replace the silicone joint if it lifts or discolours.
    Do I need council approval to retile a kitchen?
    Retiling a splashback or floor is cosmetic work and does not normally need council approval. Approval may be needed if the renovation changes plumbing, structure or the layout of the room, and a licensed electrician must disconnect and reconnect any power points in the splashback. We can advise on what applies to your job.
    Where we work

    Kitchen Tiling & Splashbacks anywhere in South Australia

    Choose your region to find your suburb page and local details.

    Other services

    Ready to talk about kitchen tiling?

    Get a free, no-obligation quote. We service every suburb and town in South Australia and are ready to bring your plans to life.

    Get a Free Quote 0400 028 777