Skip to content
    Outback & Far North · SA 5717

    Tilers in Mount Ive

    Waterproofing done to AS 3740, tiles laid to last and a site left clean. That is what SA Tiling Pro delivers for property owners in South Australia's Far North, including Mount Ive. We are fully licensed and insured, and every quote is free and without obligation.

    Postcode
    SA 5717
    Licensed
    Fully insured
    Quotes
    Free, itemised
    Experience
    20+ years
    Services

    Tiling services in Mount Ive

    Everything from a splashback to a full commercial fit-out, delivered to Mount Ive and the wider Outback & Far North area.

    Renovations

    Complete bathroom renovations for Mount Ive homes

    Whether it is a main bathroom, an ensuite or a small second bathroom, SA Tiling Pro delivers complete renovations in Mount Ive: demolition and disposal, substrate repair, waterproofing, tiling, shower screens and accessories, with fixtures fitted off by a licensed plumber.

    Because we are tilers first, the finish is where the difference shows: flat floors with minimal lippage and proper falls to the waste, aligned niches, tight grout lines and slip-rated tiles chosen for a wet area.

    Renovated bathroom with stone-look wall tiles, a walk-in shower and a wall-hung vanity, the kind of finish available to Mount Ive homes
    Local knowledge

    Tiling homes and businesses in Mount Ive

    Local knowledge saves money. Knowing which adhesives, membranes and grouts suit conditions in South Australia's Far North means fewer call-backs, less wasted material and a result that still looks right years later.

    Housing in the Far North is shaped by mining, defence and pastoral work: underground dugouts and above-ground homes in Coober Pedy and Andamooka, purpose-built brick and lightweight housing in Roxby Downs (established in the late 1980s for the Olympic Dam mine), and older village housing in Woomera and 1980s town housing in Leigh Creek. Beyond the towns, station homesteads, roadhouses, motels and workforce accommodation make up much of the building stock.

    Choosing tiles and grout for Mount Ive homes

    We help you weigh up porcelain, ceramic, stone and mosaics for each space, and we advise on grout colour, joint width and sealing so the finish is easy to keep clean and suits the way the room is used.

    Renovation or new build in Mount Ive

    On a renovation we deal with what is already there: uneven screeds, old membranes, plumbing that has moved and tiles that were never level. On a new build we work to the plans, coordinate with the builder and other trades, and have the wet areas ready for fit-off when the program says they should be.

    About Mount Ive

    Mount Ive (postcode 5717) is part of the Outback & Far North region, 5 to 10 hours north of Adelaide. SA Tiling Pro is Adelaide based and services Mount Ive along with nearby Hiltaba, Kokatha, Kolendo.

    Things we consider in South Australia's Far North

    • Tiling in dugout homes

      Dugouts in Coober Pedy and Andamooka are cut into rock, so walls and floors need a stable, levelled substrate before any tile goes down. Bathrooms and laundries in dugouts still need full waterproofing to AS 3740.

    • Bore water and mineral build-up

      Many towns and stations rely on bore, tank or treated groundwater. Hard water leaves mineral deposits on grout and tile surfaces, so we recommend sealed or epoxy grout in showers and laundries and choose finishes that are easy to clean.

    All Outback & Far North suburbs
    How it works

    What a tiling job in Mount Ive looks like

    Once you accept the quote we lock in dates, confirm tile selections and organise materials. Work in Mount Ive runs in a clear sequence: preparation, waterproofing, tiling, grouting and clean-up.

    1. 01

      Get in touch

      Call or send the quote form with a few details about the space and the tiles you have in mind.

    2. 02

      On-site quote

      We measure up, check the substrate and waterproofing, and give you a clear written quote.

    3. 03

      Preparation and tiling

      Surfaces are prepared, wet areas waterproofed, then tiles are laid to a planned layout.

    4. 04

      Grout, seal, hand over

      Grouting, silicone and a full clean-up, then a walk-through to make sure you are happy.

    Why choose us

    Why Mount Ive chooses SA Tiling Pro

    • 20+ years on the tools

      Two decades of bathrooms, kitchens, floors and commercial fit-outs across South Australia.

    • Fully licensed and insured

      Licensed tiling contractor with public liability insurance, so your project is protected.

    • Waterproofing done properly

      Wet areas prepared and sealed to Australian Standard AS 3740 before tiles go down.

    • Straight lines, level floors

      Careful layout, lippage control and clean grout lines on every job, large or small.

    • Transparent, free quotes

      Itemised written quotes with no hidden extras and no obligation.

    • All of SA, city and country

      Adelaide based and happy to travel for regional work from the Riverland to the Eyre Peninsula.

    Free quote for Mount Ive

    Tell us about the job and we will be in touch within one business day.

    Free, no-obligation quotes. We reply within one business day.

    FAQ

    Tiling questions from Mount Ive

    If you have a bathroom, kitchen, floor or outdoor area in Mount Ive that needs tiling, we would like to hear about it. Get in touch for a free, itemised quote.

    Do you travel to Mount Ive?
    Yes. SA Tiling Pro is based in Adelaide and services all of South Australia, including Mount Ive and the surrounding Outback & Far North area. Any travel for regional work is included in your written quote up front.
    Is waterproofing included in bathroom and laundry tiling?
    Yes. Every wet area we tile is waterproofed to Australian Standard AS 3740 before tiling starts, and the waterproofing is itemised on your quote.
    Do you travel to Mount Ive?
    Yes. SA Tiling Pro services all of South Australia, and Mount Ive is 5 to 10 hours north of Adelaide. For metropolitan work we travel daily; for regional and remote jobs we arrange travel so the work is completed in as few trips as possible.
    Will tiles and grout hold up in the heat and with bore water?
    Yes, with the right specification. We use flexible adhesives and movement joints for heat, following AS 3958.1, and recommend sealed or epoxy grout where bore or hard water is used. Wet areas are waterproofed to AS 3740 regardless of location.
    Is waterproofing included in bathroom tiling?
    Yes. Any wet area we tile is waterproofed to Australian Standard AS 3740 before tiling begins. Waterproofing is itemised on your quote so you can see exactly what is included.

    Need a tiler in Mount Ive?

    Free, itemised quotes for homes and businesses in Mount Ive and across Outback & Far North. Call 0400 028 777 or send the form.