Skip to content
    Yorke Peninsula & Copper Coast · SA 5575

    Tilers in Marion Bay

    Straight answers, a written quote and a tiler who has done this for more than 20 years. SA Tiling Pro services Marion Bay 5575 and the rest of South Australia, with travel arranged for regional and remote work. Waterproofing, tiling and repairs are all handled by the one contractor.

    Postcode
    SA 5575
    Licensed
    Fully insured
    Quotes
    Free, itemised
    Experience
    20+ years
    Services

    Tiling services in Marion Bay

    Everything from a splashback to a full commercial fit-out, delivered to Marion Bay and the wider Yorke Peninsula & Copper Coast area.

    Renovations

    Bathroom renovations in Marion Bay

    A full bathroom renovation in Marion Bay is one of the most common jobs we quote. SA Tiling Pro manages the whole project: strip-out, coordination of licensed plumbers and electricians, screeds and waterproofing to AS 3740, floor and wall tiling, fit-off of screens, mirrors and accessories, and the licensed plumber fitting off vanities, toilets and tapware.

    Most renovations take two to four weeks. We keep the rest of the house usable, clean up daily and give you a written, itemised quote before any demolition starts.

    Renovated bathroom with stone-look wall tiles, a walk-in shower and a wall-hung vanity, the kind of finish available to Marion Bay homes
    Local knowledge

    Tiling homes and businesses in Marion Bay

    On a build or renovation, the tiler sits between the plumber, the waterproofer, the cabinetmaker and the painter. If the tiling runs late, everyone behind it does too. SA Tiling Pro works to the program, confirms dates with the builder or site supervisor and turns up when booked, which is what keeps a job in Marion Bay on schedule.

    The Copper Coast has 19th-century stone cottages and churches alongside 1960s to 1980s brick homes and newer subdivisions around Moonta Bay, Port Hughes and Wallaroo. Across the rest of the peninsula you find farmhouses, older holiday shacks and a growing number of modern sea-change homes in towns such as Port Vincent, Stansbury and Marion Bay.

    Tiling around an occupied home in Marion Bay

    Most of our residential work happens while people are living in the house, so we seal off the work area, keep dust down and let you know each day what is happening next. If the house has one bathroom, we plan the sequence so it is out of action for the shortest time we can manage.

    Renovating an existing home in Marion Bay

    Older bathrooms and kitchens often hide uneven floors, out-of-square walls and tired waterproofing. We strip out carefully, level and prepare the substrate, then waterproof and tile so the new finish is flat, dry and built to last.

    About Marion Bay

    Marion Bay (postcode 5575) is part of the Yorke Peninsula & Copper Coast region, 1.5 to 3 hours north-west of Adelaide. SA Tiling Pro is Adelaide based and services Marion Bay along with nearby Bluff Beach, Brentwood, Corny Point.

    Things we consider on the Yorke Peninsula

    • Salt air and slip resistance

      Coastal homes take salt-laden wind year-round, which is hard on grout, fixings and exposed tile edges. Outdoor and pool tiles should be slip-rated to AS 4586 and laid with exterior-grade adhesive and sealed grout, with a membrane to AS 4654 under any balcony or deck.

    • Holiday homes and wet areas

      Shacks and rentals get heavy use in bursts and can sit empty for months between. Waterproofing to AS 3740 and correctly graded floor falls matter more here, because a small leak can go unnoticed until real damage is done.

    All Yorke Peninsula & Copper Coast suburbs
    How it works

    What a tiling job in Marion Bay looks like

    A job in Marion Bay starts with a free quote, on site where practical, that sets out the work, the materials and the timing in writing. From there we book a start date, confirm it with you or your builder, and turn up when we said we would.

    1. 01

      Get in touch

      Call or send the quote form with a few details about the space and the tiles you have in mind.

    2. 02

      On-site quote

      We measure up, check the substrate and waterproofing, and give you a clear written quote.

    3. 03

      Preparation and tiling

      Surfaces are prepared, wet areas waterproofed, then tiles are laid to a planned layout.

    4. 04

      Grout, seal, hand over

      Grouting, silicone and a full clean-up, then a walk-through to make sure you are happy.

    Why choose us

    Why Marion Bay chooses SA Tiling Pro

    • 20+ years on the tools

      Two decades of bathrooms, kitchens, floors and commercial fit-outs across South Australia.

    • Fully licensed and insured

      Licensed tiling contractor with public liability insurance, so your project is protected.

    • Waterproofing done properly

      Wet areas prepared and sealed to Australian Standard AS 3740 before tiles go down.

    • Straight lines, level floors

      Careful layout, lippage control and clean grout lines on every job, large or small.

    • Transparent, free quotes

      Itemised written quotes with no hidden extras and no obligation.

    • All of SA, city and country

      Adelaide based and happy to travel for regional work from the Riverland to the Eyre Peninsula.

    Free quote for Marion Bay

    Tell us about the job and we will be in touch within one business day.

    Free, no-obligation quotes. We reply within one business day.

    FAQ

    Tiling questions from Marion Bay

    Take the guesswork out of your next tiling project in Marion Bay. SA Tiling Pro provides clear advice, honest pricing and a finish you will be proud of.

    How does a quote for Marion Bay work?
    Quotes are free and carry no obligation. Where practical we come out to Marion Bay, measure up, look at the substrate and the existing waterproofing, and put the price in writing. Where distance makes that impractical, or the job is a new build, we quote from plans and photos first and confirm on site. The quote sets out what is included so there are no surprises once work starts.
    Can I supply my own tiles, or do you supply them?
    Either works. We can source tiles for you, or you can choose your own and we will lay them. If you are supplying, tell us before we quote so we can check the tile suits the area, confirm you have enough to allow for cuts and wastage, and make sure it arrives in Marion Bay before the start date.
    How do quotes work for jobs in Marion Bay?
    Send a few details through the quote form or call us, and we will arrange a site visit to measure up. You receive a free, itemised written quote with no obligation to proceed.
    Does a beach house need different tiles to a home in Adelaide?
    Outdoors, yes. Salt air, wind and sand are harder on exposed surfaces, so we specify slip-rated tiles to AS 4586, exterior adhesives and sealed or epoxy grout for alfresco, pool and entry areas. Inside, the main difference is making sure wet areas are waterproofed to AS 3740, because a holiday home can sit unoccupied for long stretches.
    Do you supply the tiles or can I buy my own?
    Either works. We can source tiles through our suppliers or lay tiles you have already chosen. If you are supplying your own, we will tell you how much to order including a cutting allowance.

    Need a tiler in Marion Bay?

    Free, itemised quotes for homes and businesses in Marion Bay and across Yorke Peninsula & Copper Coast. Call 0400 028 777 or send the form.