Skip to content
    Yorke Peninsula & Copper Coast · SA 5550

    Tilers in Nantawarra

    Whether it is a tired shower, a new kitchen or a complete floor, SA Tiling Pro delivers professional tiling on the Yorke Peninsula. We measure up on site in Nantawarra, explain the options and put everything in writing before work starts.

    Postcode
    SA 5550
    Licensed
    Fully insured
    Quotes
    Free, itemised
    Experience
    20+ years
    Services

    Tiling services in Nantawarra

    Everything from a splashback to a full commercial fit-out, delivered to Nantawarra and the wider Yorke Peninsula & Copper Coast area.

    Renovations

    Renovating a bathroom in Nantawarra

    Homes in Nantawarra and across Yorke Peninsula & Copper Coast range from older bathrooms with tired tiles and failing waterproofing to newer rooms that simply need a refresh. Either way, we start with a site visit, talk through layout and tile options, and quote the renovation in full.

    From there SA Tiling Pro runs the job as a single trade, booking plumbing and electrical work around our program so the bathroom comes back together in the right order and to the timeline we set out in the quote.

    Renovated bathroom with stone-look wall tiles, a walk-in shower and a wall-hung vanity, the kind of finish available to Nantawarra homes
    Local knowledge

    Tiling homes and businesses in Nantawarra

    Local knowledge saves money. Knowing which adhesives, membranes and grouts suit conditions on the Yorke Peninsula means fewer call-backs, less wasted material and a result that still looks right years later.

    The Copper Coast has 19th-century stone cottages and churches alongside 1960s to 1980s brick homes and newer subdivisions around Moonta Bay, Port Hughes and Wallaroo. Across the rest of the peninsula you find farmhouses, older holiday shacks and a growing number of modern sea-change homes in towns such as Port Vincent, Stansbury and Marion Bay.

    New builds and extensions in Nantawarra

    On new work we tile to plan and to program. We liaise with your builder on set-downs, falls and waterproofing inspections, and we schedule around other trades so your build keeps moving.

    Matching and repairing tiles in Nantawarra

    Not every job needs a full strip-out. We replace cracked tiles, regrout showers, renew silicone and blend new work into existing tiling wherever a sensible match can be found.

    About Nantawarra

    Nantawarra (postcode 5550) is part of the Yorke Peninsula & Copper Coast region, 1.5 to 3 hours north-west of Adelaide. SA Tiling Pro is Adelaide based and services Nantawarra along with nearby Beaufort, Bowmans, Inkerman.

    Things we consider on the Yorke Peninsula

    • Holiday homes and wet areas

      Shacks and rentals get heavy use in bursts and can sit empty for months between. Waterproofing to AS 3740 and correctly graded floor falls matter more here, because a small leak can go unnoticed until real damage is done.

    • Soil movement and joints

      Much of the peninsula is limestone and sandy loam, but some areas have clay soils that shift with the seasons, and slabs on farms and new lots move with them. Movement joints placed to AS 3958.1 keep floor tiles from cracking.

    All Yorke Peninsula & Copper Coast suburbs
    How it works

    What a tiling job in Nantawarra looks like

    The work itself follows a fixed order: preparation, waterproofing where it applies, tiling, grouting, sealing and clean-up. We check each stage before moving to the next, because a level floor and a dry membrane are far easier to get right than to fix.

    1. 01

      Get in touch

      Call or send the quote form with a few details about the space and the tiles you have in mind.

    2. 02

      On-site quote

      We measure up, check the substrate and waterproofing, and give you a clear written quote.

    3. 03

      Preparation and tiling

      Surfaces are prepared, wet areas waterproofed, then tiles are laid to a planned layout.

    4. 04

      Grout, seal, hand over

      Grouting, silicone and a full clean-up, then a walk-through to make sure you are happy.

    Why choose us

    Why Nantawarra chooses SA Tiling Pro

    • 20+ years on the tools

      Two decades of bathrooms, kitchens, floors and commercial fit-outs across South Australia.

    • Fully licensed and insured

      Licensed tiling contractor with public liability insurance, so your project is protected.

    • Waterproofing done properly

      Wet areas prepared and sealed to Australian Standard AS 3740 before tiles go down.

    • Straight lines, level floors

      Careful layout, lippage control and clean grout lines on every job, large or small.

    • Transparent, free quotes

      Itemised written quotes with no hidden extras and no obligation.

    • All of SA, city and country

      Adelaide based and happy to travel for regional work from the Riverland to the Eyre Peninsula.

    Free quote for Nantawarra

    Tell us about the job and we will be in touch within one business day.

    Free, no-obligation quotes. We reply within one business day.

    FAQ

    Tiling questions from Nantawarra

    If you have a bathroom, kitchen, floor or outdoor area in Nantawarra that needs tiling, we would like to hear about it. Get in touch for a free, itemised quote.

    Can you help with choosing tiles and grout colours?
    Yes. We will tell you what works in practice: which grout colours hide wear in a busy hallway, which finishes suit a wet floor, and where a large-format tile needs a flatter substrate than a small one. The choice is yours, but you will make it with the trade-offs explained.
    Can I supply my own tiles, or do you supply them?
    Either works. We can source tiles for you, or you can choose your own and we will lay them. If you are supplying, tell us before we quote so we can check the tile suits the area, confirm you have enough to allow for cuts and wastage, and make sure it arrives in Nantawarra before the start date.
    How long will the tiling take?
    A single bathroom typically takes several days once waterproofing cure times are allowed for; a splashback or a small floor can be quicker, and a commercial fit-out longer. We give you a schedule with the quote for your job in Nantawarra and tell you straight away if anything changes. Cure times cannot be rushed, so we build them into the program rather than cutting them short.
    How far ahead should I book a tiler for a job on the peninsula?
    Regional jobs are scheduled as trips, so earlier is better, particularly in the lead-up to summer when holiday homes get readied. Send through photos, measurements and your preferred dates and we will give you a quote and a realistic start window. Our hours are Monday to Friday, 7am to 5pm.
    Is waterproofing included in bathroom tiling?
    Yes. Any wet area we tile is waterproofed to Australian Standard AS 3740 before tiling begins. Waterproofing is itemised on your quote so you can see exactly what is included.

    Need a tiler in Nantawarra?

    Free, itemised quotes for homes and businesses in Nantawarra and across Yorke Peninsula & Copper Coast. Call 0400 028 777 or send the form.